Our state-of-the-art cleaning equipment is specifically designed to protect & enhance the natural beauty of your hardwood floors, exceptional results, every time.
1000's of Happy Clients
Excellent
5.0 / 5 Stars
Pavol Rehus
April, 2026
Becky J
May, 2026
Jacqueline Maldonado
May, 2026
Daniel Sowinski
May, 2026
Tabatha Clare
June, 2026
Monica Torres
June, 2026
Regular sweeping and mopping can help maintain your hardwood floors, but they don’t achieve the deep, thorough clean that professional cleaning does. Home cleaning methods just push dirt around without removing it, leaving behind a residue that dulls your floor over time.
Why Choose Best Carpet Cleaning Pro?
We pride ourselves on delivering exceptional results, without compromising the integrity of your flooring. We’ve developed our floor cleaning process, over two decades and hundreds of hardwood floors.
We begin by inspecting your hardwood floors, identifying problem areas that may need extra attention, and making a plan. Loose dust, dirt and lint are removed with thorough vacuuming. to prepare the surface for cleaning.
Using advanced cleaning equipment, we loosen dirt and residue trapped in the floor’s surface. The cleaning solution purges the flooring of any remaining debris, which is then vacuumed away. Our technicians use microfiber cloths to clean edges and corners that require a delicate touch.
We apply a neutralizing solution to clean the floor a second time, for a stunning shine, followed by a detailed final inspection to make sure every inch of your floor has been thoroughly cleaned to our high standards.
We highly recommend applying our Hardwood Finish Refresher after cleaning. This protective layer adds shine and luster to your flooring.
Hardwood floors need a different cleaning process to carpet, or even tiles. Too much moisture, the wrong cleaner or aggressive scrubbing can dull the finish or even more serious damage. We’ve been serving Chicago suburb homeowners for 20+ years, we know what we’re doing. We inspect the floor, and we identify problem areas first, but just as important, we know when to stop cleaning.
Household cleaners can leave more behind than they remove. Repeated mopping with the bad detergents can leave residue, streaking or a dull film, that makes your hardwood floor look tired, and older than it is. Our process uses professional cleaning solutions as part of a controlled system, we don’t soak the floor. We then use a neutralizing solution for a second clean.
A clean floor can still look flat if the existing finish has lost some of its shine. After cleaning, we can apply our hardwood finish refresher, if it’s suitable. It adds shine and luster. The refresher is a maintenance coating, not refinishing. It doesn’t remove deep scratches, repair worn boards or reverse discoloration, but if your floor is in good condition it can look as good as new again.
You can request a free estimate for hardwood floor cleaning before booking the work. The more we know about the floor, the more accurate that estimate will be. Tell us the approximate area to be cleaned, the number of rooms, the general condition of the floor and any specific problems you want us to look at. Our pricing is straightforward, with no hidden fees or unnecessary upsells.
5.0 / 5 Stars
Request Your FREE Estimate
Quality and Expertise: We bring nearly two decades of industry knowledge and cutting-edge techniques to every job.
Exceptional Service: Your needs are our top priority. Don’t just take our word for it, read our testimonials.
No hidden fees, no surprises. Just straightforward, fair pricing.
100% Satisfaction Guarantee.
Eco-Friendly Cleaning Products: Safe for your family, pets, and the environment, our products are both gentle and highly effective.
The Deepest, Healthiest Clean: We don’t just clean your carpets; we remove allergens, dust mites, and other unseen particles that have made their way into the fibers. Our advanced techniques ensure a deep and thorough clean, leaving your carpets healthier and fresher than ever.
It always depends on why… what’s making the floor look worn. Hardwood cleaning removes dirt and build-up sitting on the surface. If the floor is in good condition generally, but it looks dull, streaky or dirty despite regular mopping, professional cleaning may be the right first step.
Refinishing is different. It’s a restoration process used when the finish itself is badly worn or when the floor has physical damage; cleaning cannot correct that. Deep scratches, exposed bare wood, significant wear or damaged boards all point to refinishing rather than cleaning.
But there is a middle ground. A floor that is structurally sound, but has lost some of its luster, will benefit from our Hardwood Finish Refresher after cleaning. That adds a fresh maintenance coating, and keeps your floor looking new for years to come. Don’t assume that your floor needs to be sanded. We’ll inspect the surface first, and explain what cleaning can realistically do before the work begins.
Professional hardwood floor cleaning is more thorough than normal sweeping and mopping. Routine cleaning removes the loose dust, grit, crumbs and fresh spills that collect during everyday use. That’s important, because abrasive dirt can be dragged across the finish and cause micro scratches. Repeated household mopping can leave detergent residue behind, especially when too much product is used. Over time, that film traps more soil and dulls the surface.
Yes, professional cleaning is better than regular cleaning. But you do need both: a sensible routine of cleaning between appointments, with professional cleaning when ordinary maintenance isn’t getting the job done anymore.
We begin with an inspection of the floor and identify high traffic areas, with heavier dirt, residue or other visible problems. Loose dust, dirt and lint are then removed by thorough vacuuming so abrasive debris is not being worked around during the wet-cleaning stage.
Professional cleaning equipment and cleaning products are used to loosen the dirt and residue from the entire surface. This material is removed rather than left to dry back into the floor. Areas that need more delicate attention, edges and corners for example, may be cleaned by hand with microfiber cloths. Then we apply a neutralizing solution for a second cleaning pass and carry out a final inspection.
The optional Hardwood Finish Refresher Top Coat is a separate step. It is applied after cleaning when the floor is dry, adding shine and luster.
Surface dirt, tracked-in soil, detergent residue and general build-up are cleaning issues. Scratches, worn-through finish, dents, damaged boards and other defects are not. Discoloration can fall into either camp; sometimes a dark or dull area (especially oak floors) is surface contamination, sometimes they’re in the finish or the wood itself.
We also consider the construction of the floor, and the existing finish, because not all floors are maintained in exactly the same way. Where the history of the floor is known, information about the flooring, previous coatings and products used on it is useful. If something is uncertain, it’s better to treat the uncertainty cautiously.
The assessment sets expectations, and the scope of the work, before cleaning starts; the areas that need extra attention and separate the likely improvement cleaning can make from actual damage, that requires refinishing or repair.
No cleaning company can guarantee that every mark, or every stain, will disappear. Hardwood floors look dirty for a number of different reasons, and some of those reasons have nothing to do with dirt.
Professional cleaning can remove accumulated dirt. What it cannot do is reverse physical wear, or turn back the clock. Scratches, worn finish, dents and other damage will still be there after cleaning. Inspection matters. We look at the condition first and explain; what’s a cleaning problem and what may be permanent.
Start with the basics: your location, and the amount of flooring to be cleaned. Exact measurements are helpful if you have them, but an approximate number or room dimensions are enough in most cases.
We also need to understand the condition of the floor. Tell us what your main issue is; general dullness, visible dirt, detergent build-up, staining, heavy traffic areas or something else. If there are scratches, worn finish, water marks or damaged boards, tell us about that too. We can’t fix these, but knowing about them helps us separate cleaning work from repair work.
If you know the type of wood, solid or engineered, the approximate age, what finishes have been applied or maintenance products used, include that information.
The visual inspection tells us a lot about the construction, plank pattern, surface texture, wear and the way the finish behaves. Information from you, the homeowner, is also really useful. If you know the manufacturer, the product name, whether the floor was site-finished or factory-finished, when it was installed, has it been waxed, polished or oiled, tell us this before the work starts.
Sometimes the wood is less important than the finish. A surface-coated floor, an oiled floor and a waxed floor all react differently to the cleaning process. If the finish history is unknown, we tread more cautiously.
Small items; chairs, side tables, floor lamps, baskets and other loose objects, yes. Heavy, fragile or difficult furniture is different. Don’t drag a large cabinet, sofas or other heavy item across hardwood simply to clear the room; that can scratch the finish. If an item can’t be moved safely, tell us and we’ll plan around it.
Furniture should also be returned carefully after the service. Protective pads beneath furniture legs reduce scratching during normal use, and nothing should be placed back onto a cleaned or coated area until the floor is ready for use.
There is no single drying time that applies to every floor. The “return-to-use time” depends on the moisture level, the floor and finish, room temperature, humidity, and airflow. If a top coat is applied, the floor needs additional time for that coating to dry before it is put back into normal use.
Sometimes. If the mark is caused by material that can actually be removed from the surface. Professional cleaning can improve stained or discolored areas, if it’s caused by dirt, tracked-in residue or other surface build-up.
If a liquid or chemical has altered the finish, penetrated into the wood and physically damaged the surface, cleaning cannot reverse that change. Moisture can also cause discoloration of the wood. Prolonged sunlight can change the color of the wood and the finish over time. Everyday wear can make an area look lighter or duller because the finish itself has gone. We can’t fix that.
Keep the routine simple; remove abrasive grit, deal with spills quickly,avoid excessive moisture and products that leave residue on the floor. Sweep, dust, mop and vacuum regularly, using a setting and attachment intended for hard floors. Dirt and grit may look harmless, but foot traffic can drag those particles across the finish.
For damp cleaning, use a wood floor product intended for that job and follow the directions on the pack. More cleaner is not better. Don’t “flood” the floor, leaving standing water on it using a wet mop. Steam mops should also be avoided.
Stained grout can be incredibly frustrating, and difficult to clean on your own. You need a pro to clean it. Choose the best around, Best Carpet Cleaning Pro.
Facing tough pet stains? We've got you covered !! Using our pro products and expert techniques, we’ll leave your carpets and rugs looking and smelling as fresh as ever.
Dirt, spills, stains... your carpet has a lot to deal with. For carpet cleaning in Orland Park choose Best Carpet Cleaning Pro. Expert pre-treatment and hot water extraction lifts and removes everything, for good.